Page 30
System configuration
© 2017 Ropam Elektronik
BI (bistable, two stable states) the output changes normal state after the event marked in the
"Enclosed by" field to the opposite state and remains in it until the next event, eg, violation of the input.
Output in BI mode for triggering as ALARM acts as a latch, to clear the alarm.
TIME [s]
Specifies the operating time [s] of the output in MONO mode, parameter 1-9000 s.
SMS ON
In the tab we enter the text of the SMS which will activate the given output (default OnX where X =
output number). The maximum length of the SMS is 20 characters. Do not use special characters (eg
Polish letters).
SMS OFF
In the tab we enter text SMS which will disable the given output (default OffX where X = output
number). The maximum length of the SMS is 20 characters. Do not use special characters (eg Polish
letters).
REQUIRE THE CODE
Selecting the option will result control of the given output via SMS will require to place in the content
except SMS ON / SMS OFF, SMS CODE (tab: Communication, tests, counters).
DTMF On
OnIn the tab we enter the DTMF code, which will turn on output (DTMFOn *). recommended lengths of
2-4 characters (numbers).
DTMF Off
In the tab we enter the DTMF code, which will turn off the output (DTMFOff *). recommended lengths
of 2-4 characters (numbers).
EXCLUDED BY
Defining what events control the output, selecting several options creates the LOGIC SUM (OR) of
these events (ie the output is active when at least one event has been fulfilled), it allows to combine eg
control: simultaneous SMS and CLIP.
SMS
tick option allows you to control output via SMS (command or access code + command
depending on configuration) or RopamDroid application.
CLIP
option allows output control by a short connection with the module telephone number. The
function is available if the control is enabled in the "NUMERICALLY CONTROLLED NUMBERS FOR
CLIP CONTROL" option by the numbers entered in the PHONE NUMBERS fields.
DTMF
allows you to control the output via DTMF during a voice call (DTMFOn * or DTMFOff *).
