Page 28
System configuration
© 2017 Ropam Elektronik
For a liquid level of 0m, the signal output at the transmitter output is 4 [mA], which is 20 [mA] for the
maximum level (10m).
COMMENTS:
In SMS "STAN" are displayed values from inputs I7 / I8 in units set in the program.
Inputs - Notifications.
BasicGSM 2 Module has the following options for notification of change in input / alarm from
inputs: SMS
Ringing
E-mail
• Text of SMS VIOLATION / SMS BACK:
In the tab we enter text messages that will be sent at the
events. It is possible to send independent SMS messages on violation and return of entry. The
maximum length of the SMS is 30 characters. Do not use special characters (eg Polish letters).
• TCP code
: Event code sent to RopamRMS or KronosNET monitoring station
• Audio message:
To select the available messages recorded in the VSR-2 module or module,
specify the message number to be played for the event. (Configure messages in tab "Communication,
tests, counters").
• FLASH SMS:
notification of violation / return from a given input displayed on the phone screen but
NOT STORED IN THE PHONE MEMORY!
• Attach STATUS:
In addition to the notification in the form of one of the above, the module attaches
an SMS to the state of the system at the time the notification is generated.
COMMENTS:
- remember that a FLASH message can easily be overlooked because it is not stored in the
phone (disappears from the phone display, for example, when someone is calling), the FLASH
option may not work when sending SMS messages to another operator than the module SIM
card (This is not dependent on the settings, but because of the limitations imposed by the
operators!).
