Page 59
System configuration
© 2017 Ropam Elektronik
COMMENTS:
- the character (s) in the command may be arbitrary,
- between the commands must be spaced (space),
- there is no obligation to enter all parameters, the parameters skipped in the SMS will remain
unchanged,
- in one SMS you can configure more than one parameter, just remember not to exceed the
maximum length of 160 characters, in which case we only enter the access code once (at the
beginning of the SMS),
- national characters (Polish),
- the system supports text formatting; GSM or UNICODE alphabet,
- maximum number of characters for I / O notifications: 30,
- maximum number of characters for switching on / off: 20,
Remote configuration: TELEPHONE NUMBERS / SMS CENTER.
Parameter
Description
Example
Comments
#### phonex nnnn
Change or enter a new phone
number (nnnn= phone number)
1111 48555666777
####= code SMS
nnnn= phone number in international
format
#### phonex
Removing a phone number from the
module memory
1111 phone1
####= code SMS
#### addphone nnnn
Appends number to the first free
position. After successful execution
the module sends the SMS "Added
number", otherwise "Error, no
number added!"
1111 ad48555666888
####= code SMS
nnnn= phone number in international
format
#### delphone nnnn
Removes indicated number from
memory. After the correct execution,
module sends the SMS "Number of
removals", otherwise "Error, the
number was not deleted!"
1111 de48555666888
####= code SMS
nnnn= phone number in international
format
#### smscenter nnnn
Change or enter a new SMS center
number (nnnn = center number)
1111 sms48100200300
####= code SMS
nnnn= phone number in international
format
#### sendsms xxxx; abcd
Send sms to the specified number eg
activate operator services yyyyy
sendsms phone number; sms text
1111 send 502636033;
Welcome
#### = code sms
xxxx = phone number
abcd = sms text
#### gprsstat
The module returns information
about the amount of data used by
GPRS (data sent, duration of
connection with RopamBasic
application) RMS monitoring server
1111 gprsstat
#### = gprsstat
Remote configuration: TEMPERATURE.
Parametr
Opis
Przykład
Uwagi
yyyy tempmonit x
Remote on / off
SMS / VOICE alert function when exceeding
temperature thresholds a, b.
X = 1 function enabled
x = 0 function disabled
yyyy - current access code
1111 tempmonit 1
Only TSR-xx series sensors can be used with the
BasicGSM 2 module
yyyy tempa xx
Set threshold a for thermostat
1111 tempa 22
Set value of 22ºC as "a" value of thermostat
