Page 29
System configuration
© 2017 Ropam Elektronik
Tab: Outputs
NAME:
Name assigned to the output to identify the device connected to it.
POLARITY:
Configuration selection in normal state:
- O1 output - relay, potential free, COM, NO, NC contacts, not active in normal state- open NO or
shorted to NC, O2-O4
ACTION:
Mono (monostable, one stable state)
, the output changes the normal mode after the event marked
in the "Switched on" field for time specified in the "Time [s]", after this returns to its normal state.
It is possible to shorten MONO time via SMS, DTMF or mobile applications.
BI (bistable, two stable states)
the output changes normal state after the event marked in the
"Enclosed by" field to the opposite state and remains in it until the next event, eg, violation of the input.
