Using PEEDI
•
NOT FOUND
•
INVALID ARGUMENT
•
GENERIC ERROR
More information about the error can be obtained by connecting to PEEDI using telnet and then
restarting the script. Status messages are output to every opened telnet connection when a script is
executed.
The scripts are defined in the following manner: in the [ACTIONS] section list all scripts that you
want to define in this format:
N = script_name
where N a hex number (1-9 and A-F) and is associated with the script_name, then define section
named [script_name] and put any number of commands, each command must be on a new line.
These scripts are useful when using PEEDI in autonomous (stand-alone) mode, not connected to a
PC. In such mode PEEDI can be used as a stand-alone FLASH programmer. If all needed files are
stored on a MMC/SD card no Ethernet cable is necessary and PEEDI will only need a power supply
cable. If AUTORUN=N parameter is specified, where N is number of a script, the given script will
be executed every time a target is connected to PEEDI. This eliminates the need to manually start
the script, very useful and time saving when large volumes of target boards need tobe programmed.
Example:
PEEDI User’s Manual
96
