Using PEEDI
operation, this would prevent FLASH form accidental write or erase operations.
CPU_CLOCK
Synopsis:
CPU_CLOCK = <kHz>
Description:
The CPU clock after the initialization. Used when describing internal FLASH of Atmel
AT91SAM7, Philips LPC2000 and Freescale MAC7100 or MCF5200 series
microcontrollers.
SECURE_FLASH
Synopsis:
SECURE_FLASH = YES|NO
Description:
Do or do not secure FLASH to avoid external reading operations. This disables the
JTAG interface until the whole FLASH is erased, so any JTAG operations are
impossible after FLASH is programmed and secured.
Used when describing internal FLASH of Atmel AT91SAM7 series microcontrollers.
SET_VECTORS_CHECKSUM
Synopsis:
SET_VECTORS_CHECKSUM = YES|NO
Description:
Set this parameter to YES, if you want PEEDI to automatically calculate and set the
exception vectors checksum at address 0x14 while programming FLASH. This check
sum is required by the microcontroller bootloader as evidence that valid user
application resist in the FLASH, so the control will be passed to it.
Used when describing internal FLASH of Philips LPC2000 series microcontrollers.
PEEDI User’s Manual
71
