Using PEEDI
is to copy the needed files using the PEEDI CLI transfer command, for this purpose you will also
need a FTP, TFTP or HTTP server to copy the files from.
peedi> transfer tftp://192.168.1.1/mydir/MyFile.txt card://myfile.txt
The
transfer
command can also be used to copy files from the memory card to any file server on
the Ethernet.
Before actually copy the files, you may need to create some directories, delete old files or
something else. To do this use the PEEDI CLI
card
sub-commands.
3.18 JTAG cable adapters
PEEDI is packed with one suitable JTAG adapter for connecting to a target system.
There are several target adapters available upon request:
•
10-pin - for Cortex targets
•
14-pin - for MIPS 32, TI OMAP, Freescale PowerPC MPC5500 and Analog Devices
Blackfin targets
•
16-pin - for Freescale Power QUICK II Pro MPC83xx, Freescale Power QUICC III -
MPC85xx targets
•
20-pin - for ARM targets
•
26-pin - for Freescale ColdFire MCF52xx,MCF53xx, MCF54xx targets
For additional information refer to:
https://ronetix.at/product/peedi-jtag-swd-bdm-emulator-and-flash-programmer/#tab-target-adapters
Figure 3.6: Adapter JTAG cable
All adapters are mounted on the PEEDI JTAG connector and next the target cable is connected to
the given adapter:
•
The ARM20 adapter has standard ARM pinout and may be used with almost all ARM
evaluation boards.
PEEDI User’s Manual
164
