manualshive.com logo in svg

Ronde & Schwarz GP-E, User Manual

Share
Download
Ronde & Schwarz GP-E User Manual Download Page 88

User Interface

R&S

®

GP-U/GP-E/GP-S/GP-T

88

User Manual 3646.3836.02 ─ 01

Field

Description

"Object Name"

Specify a name for the VPN group.

"Color"

Select the color to be used for this object on the desktop.

"VPN Connections"

Select the VPN connections you want to add to the group.

Select the "Type" of the VPN connection you want to add from the drop-down
list. Under "Name", choose the desired connection from the drop-down list.
Click "Add" to add the connection to the list.

You can edit or delete each single entry in the list by clicking the appropriate
button next to an entry. For further information, see 

Chapter 3.2, "Icons and

Buttons"

, 

on page 17.

Note:

 If you edit an entry, a check mark appears on the right of the entry. Click

the check mark to apply your changes.

Note:

 VPN connections may belong to multiple VPN groups.

The buttons at the bottom right of the editor panel depend on whether you add a new
VPN group or edit an existing group. For a newly configured group, click "Create" to
add the group to the list of available VPN groups or "Cancel" to discard your changes.
To edit an existing group, click "Save" to store the reconfigured group or "Reset" to dis-
card your changes. You can click "Close" to shut the editor panel as long as no
changes have been made on it.

Click "  Activate" in the toolbar at the top of the desktop to apply your configuration
changes.

3.4.4.12

VPN Networks

Create a VPN network object that can be used to configure firewall rules for VPN Site-
to-Site connections.

VPN Networks Overview

Navigate to "Network Objects > VPN Networks" to display the list of VPN networks that
are currently defined on the system in the item list bar.

In the expanded view, the columns of the table display the "Name" of the VPN network,
the "Type" of the VPN connection as well as the VPN connection that the VPN network
belongs to. The buttons in the last column allow you to view and adjust the settings for
an existing VPN network, create a network based on a copy of an existing VPN net-
work or delete a network from the system.

For further information, see 

Chapter 3.2, "Icons and Buttons"

, 

on page 17.

VPN Networks Settings

The "VPN Network" settings allow you to configure the following elements:

Field

Description

"Name"

Specify a name for the VPN network.

"Color"

Select the color to be used for this object on the desktop.

 

Menu Reference

Summary of Contents for GP-E


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands