manualshive.com logo in svg

Ronde & Schwarz GP-E, User Manual

Share
Download
Ronde & Schwarz GP-E User Manual Download Page 19

User Interface

R&S

®

GP-U/GP-E/GP-S/GP-T

19

User Manual 3646.3836.02 ─ 01

Icon/Button

Description

Close a pop-up window.

Clear all search criteria of a filter to show all results.

3.3 Firewall Rule Settings

This topic describes how to create a firewall rule for a connection between two desktop
objects.

Setting Up a Connection

To set up a connection between two desktop objects, perform the following steps:

1. Click the connection tool button   in the toolbar at the top of the desktop.

2. Select the source object of the connection by clicking the appropriate desktop

object.

3. Select the target object of the connection by clicking the appropriate desktop

object.

The "Connection" panel opens, displaying, if applicable, already existing firewall
rules for this connection.

Alternatively, you can click the connection tool button   in the circular menu of the
source object on the desktop and then select the target object.

Setting Up a Firewall Rule with a Predefined Service

Along with the "Connection" panel, a list of predefined services available for the con-
nection opens on the right side of the browser window. The list of services can be col-
lapsed and expanded by clicking the appropriate icon.

For further information, see 

Chapter 3.2, "Icons and Buttons"

, 

on page 17.

The "Filter" input field at the top of the list helps you quickly find a particular service. As
you type in the input field, the gateprotect Firewall reduces the list to show only those
services that contain the characters you are typing. Click   in the input field to delete
the search string and display an unfiltered view of the list.

You can create a firewall rule using one of the predefined services by clicking the plus
button   in front of the service. Afterwards, you can adjust the settings on the "Sched-
ule" and "Advanced" tabs (e.g. proxy and NAT settings) by editing the rule. The ports
and protocols are predefined and cannot be adjusted.

Setting Up a Custom Firewall Rule

If you require a port or protocol that is not covered by any of the predefined services,
you can add a custom rule to be applied to the connection.

 

Firewall Rule Settings

Summary of Contents for GP-E


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands