Remote control commands
R&S
®
NRP18S-xx
102
User Manual 1178.3686.02 ─ 07
Query parameters:
<item>
"Manufacturer", "Type", "Stock Number", "Serial", "SW Build",
"Sensor Name", "Hostname", "IP Address", "Technology", "Func-
tion", "MinPower", "MaxPower", "MinFreq", "MaxFreq", "Resolu-
tion", "Impedance", "Coupling", "Cal. Due Date", "Cal. Abs.",
"Cal. Refl.", "Cal. S-Para.", "Cal. S-Para. (User)", "Cal. Misc.",
"Cal. Temp.", "Cal. Lin.", "SPD Mnemonic", "TestLimit", "TestLi-
mit pd", "Uptime"
"Hostname" and "IP Address" are available only for LAN power
sensors.
Usage:
Query only
SYSTem:INITialize
Sets the power sensor to the standard state, i.e. the default settings for all test parame-
ters are loaded in the same way as with
. The power sensor then outputs a com-
plete list of all supported commands and parameters. With the command, the remote-
control software can automatically adapt to the features of different types of sensors
with different functionality.
Usage:
Event
SYSTem:LANGuage
<language>
Selects an emulation of a different command set.
Parameters:
<language>
SCPI
*RST:
SCPI
SYSTem:LED:COLor
<color>
Effective if the operating mode of the LED is set to user-defined,
USER
.
Sets the color and the flash code of the system status LED.
Parameters:
<color>
Hexadecimal code described as
0x0krrggbb
with
k
= 0: steady on; k
= 1: slowly flashing; k
= 2: fast flashing
rr
= red
gg
= green
bb
= blue
Range:
0x00 to 0x02FFFFFF
*RST:
0x00A0A0A0
Configuring the system
