35
4. Switching on the appliance
• Press
ON/Standby
button for about 2 seconds to switch the appliance on.
NOTE:
If no further button is pressed within 2 minutes, the appliance
switches back to standby mode.
• The integrated scales determine the total weight of the appliance.
A rotating bar lights up in the display.
NOTE:
Do not move the appliance during weighing.
• After the check, the appliance turns into operating mode.
All available programmes are shown at the display.
Additionally the display shows a fl ashing
“0“
.
5. Removing the lid
• Unlock and remove the lid of the kneading container.
• The scales are active and determine the weight of the appliance without lid.
The display shows e.g.
“-155“
.
Additionally the symbol
“g“
appears.
6. Taring the scales (zero position)
IMPORTANT: Before you tare the scales to zero position, make sure
that…
… the appliance is properly assembled;
… the selected pasta form is inserted;
… the water tank is fi lled up completely to the mark;
… there is no fl our inside of the kneading container yet.
• Press the
SCALES
button to tare the scales.
NOTE:
If you change the weight of the appliance after taring the scales,
a re-taring is necessary.
NOTE:
Do not move the appliance during weighing!
• After taring is completed, the appliance is in operating mode.
All available programmes are shown at the display.
Additionally the symbol
“g“
appears.