Loading slides (standard magazine, Rollei
CM 55/50)
»
Use uniform slide mounts, preferably
only plastic or only cardboard or glass-moun-
ted slides. Slide mounts made by
are
highly recommended.
Do not use sharp-edged metal or all-glass
mounts!
»
Insert slides upside down, emulsion side
facing the screen, in the required order, star-
ting with slide slot No. 1.
NOTE:
The following description
refers to projection with DIN 108
standard magazines or the Rollei CM-
55/50 magazine supplied with the
projector.
Fitting the lenses
»
Screw in the two lenses without touching
their glass surfaces.
Setting up the projector and screen
»
Set up the screen so that it is parallel to
the front of the projector with the lenses cen-
tered on the screen. Recommended screen
size: 1.5 m x 1.5 m. Projection distance (with
85 or 90mm focal length): 1.5 m or longer
––> Table on pages 68/69.
12
BRIEF INSTRUCTIONS
Brief