56
PROGRAMMING
56
Pr
ojector
2.2 Enter mode 2 (varying projector
parameters)
“Enter mode 2” permits factory settings to
be varied. These include the dissolve times of
two of the three dissolve buttons, the bril-
liance of the projection lamps and the stereo
mode. The corrected parameters have to be
saved and reactivated as needed, because
the projector will revert to its factory settings
every time it is switched on.
To set “enter mode 2”,
»
select the »record« mode using the
»mode« button
35
»
and press the »enter« button
39
. The
information “PP” (projector parameter)
appears in display
41
.
»
Depression of the »enter« button will
transfer a changed value to the projector,
automatically terminating “enter mode 2”.
The mode display changes from »record« to
»manual«.
2.2.1 Varying dissolve time with the IR
remote control
The medium and long dissolve times can be
varied over a range of 1 – 25 s in steps of
one second.
»
The first figure entered on the keyboard
selects the dissolve button. Then enter two
digits for the dissolve time
»
and save it by pressing the »enter« but-
ton
39
.
2
x x
“medium” dissolve button
3
x x
“long” dissolve button