57
PROGRAMMING
57
Pr
ojector
2.2.2
Adjusting basic projection-lamp brilliance
MSC 325 P:
Basic lamp brilliance can be reduced.
»
Entering the figure 1 on the numerical
keyboard selects the dimmer mode of a vola-
tile memory.
»
Enter a two-digit dimmer value
»
and confirm by pressing »enter«
39
.
The following table gives approximate output
values.
4
0 0 Brilliance 100%
4
1 0 90%
4
2 0 80%
4
4 0 70%
4
8 0 Brilliance 50%
»
When switching the projector on, the
default setting is always 100%.
MSC 535 P:
The MSC 535 P has an additional boost mode
allowing basic brilliance to be increased, if
necessary.
Note:
The boost mode may shorten lamp life.
The following tables give approximate values
and differ only by selection of a volatile or
non-volatile memory.
4
8 1 Brilliance 80%
4
8 2 90%
4
8 3 100%
4
8 4 Brilliance approx. 110%
(boost mode)
» When switching the projector on, the
default setting is always 100%.
4
9 1 Brilliance 80%
4
9 2 90%
4
9 3 100%
4
9 4 Brilliance approx. 110%
(boost mode)
»
The value selected will remain locked in
memory even if the projector is switched off.