32
OPERATION
18
36
37
34
41
38
Displays and warnings
»
LED
18
on the remote control lights up
for each input command.
»
The »timer« LED
37
signals the status of
automatic timer-controlled slide changing:
LED blinking = Screen time set or timer cycle
or dissolve interrupted.
LED steady = Timer operating.
The display
34
indicates the different opera-
ting modes.
manual = Standard operation
test = Commands entered are executed
automatically via the working
memory.
auto = Automatic execution of program
from chip module.
record = Recording mode; program stored
in working memory may be loa-
ded into chip module.
During standard operation, the LED display
41
informs about slide number as well as dis-
solve and screen times.
Timer operation is indicated by the reverse-
counting second counter.
In the enter modes 1 and 2 (programming),
the program number and the special-function
(SF) ID number as well as the projector para-
meters (PP) are also displayed (–> page 41).
The »autofocus off« LED
38
lights when
autofocus is off.
In the »auto« and »record« modes, the red
»module« LED
36
signals that a command
has to be entered with the »module« button.
In the enter modes 1 and 2, the »enter«
LED
39
signals that the projector is ready for
programming via the numerical keyboard (–>
pages 42 and 52).
Pr
ojection