30
OPERATION
Timer-controlled slide changing
»
Activate the automatic screen time by
briefly pressing the »timer« button
13
.
»
Start the cycle by pressing the green for-
ward button
19
.
To vary the screen time, proceed as follows:
Screen time after depression of button
13
is
8 s.
»
Depression of the »+« button changes
the setting to 12 s. Depression of the »-«
button sets an interval of 4 s (MSC 535 P 5 s).
Simultaneous depression of the »+/-« buttons
resets the timer to 8 s.
»
To switch off the timer, press »timer«
button
13
.
If the screen time is set with the buttons
37
,
the red timer LED will at first blink red and
then light steady when the projector is started
with the green forward button
19
.
The screen time entered and the number of
the projected slide are displayed on
41
.
»
Timer intervals can easily be cut short by
pressing the forward button
19
and will then
resume normally.
»
Depression of the red reverse button
20
clears the timer and loads the previous slide
back into the projector. To go back to auto-
matic timing after such a reverse slide change,
reset the timer.
37
13
HINWEIS:
Der Timerbetrieb arbeitet nur in Vorwärtspro-
jektion.
Pr
ojection