OPERATION
23
Selecting a specific slide
If projection is to begin with a specific slide
other than No. 1, the magazine may be
advanced to the desired position.
»
To do this, keep front »focus« button
15
depressed until the corresponding magazine
slot is in the desired position.
»
Release the button and press it again to
start normal incremental advance.
»
If you have gone past the slide you want,
run the magazine back in the same way, pres-
sing the rear »focus« button
15
.
This special function only works after insertion
of the magazine, before the first slide-change
command is given by pressing button
19
or by
a sync pulse.
Direct access to a specific slide slot
»
Input slide number on numerical key-
board
40
. The corresponding number is dis-
played in
41
.
»
Trigger feed command pressing button
19
. The projector will start showing the slide
selected.
By entering slide (slot) numbers during pro-
jection via the numerical keyboard, slides can
easily be projected in any desired order. When
the next feed command is given, the slide in
position will be changed for the selected one
and dissolved onto the latter.
1
40
41
3
19
16
15
Pr
eparing
for
pr
ojection