Pr
ojektion
64
64
MALFUNCTIONS
Changing lamps
»
The lamp module of the MSC 535 P
comes with four lamps. Should one of the
lamps fail, press down release 49 and pull
the module out slightly by its grip, until it
engages in the position provided for the spare
lamp.
»
To change a lamp, press release
49
and
completely remove lamp unit
33
by its grip.
»
Remove the faulty lamp from its base,
and replace.
A spare lamp unit for the MSC 535 P is avai-
lable as an optional accessory under Cat. No.
38 131
.
Caution: Lamps are hot! Risk of burns!
»
Push spare lamp
45
with its pro-
tective sleeve all the way into
the base.
»
Only then remove the protective sleeve.
Never touch the lamp bulb with your bare
fingers!
»
To facilitate an exchange of lamps, it is
advisable always to keep a spare lamp unit
ready.
A spare lamp unit for the MSC 325 P is avai-
lable as an optional accessory under Cat. No.
66 393.
CAUTION:
Only 24V/150W halogen lamps are
suitable for use in the MSC 325 P.
These are available from Rollei under
Cat. No. 66 380.
The MSC 535 P comes with 24V/
250W halogen lamps. These are avai-
lable from Rollei under Cat. No. 85
45
49
33
Pr
ojection