Rollei Dk4010 User Manual Download

Page: 148 / 187

Introduction

Getting Ready

Taking Pictures

Playback

Set Up

GB-148

Viewing Still Images | Viewing Movies | [

] Viewing Images Automatically as a Slideshow (slideshow) | [

] Viewing Multiple Images | [INFORMATION] Viewing Image Information | [

]/[

] Erasing Unwanted

Images | [

] Protecting Images from Accidental Erasing (PROTECT) | [

] Adding Voice Messages to Still Images (POSTRECORDING) | [

] Resizing and Trimming Images (RESIZE) | [

] Rotating an Image |

[

] Using DPOF to specify print settings | [

] Printing by Connecting the Camera Directly to a Printer (PictBridge) | Connecting to a Windows PC |

Connecting to a Macintosh

NEXT

BACK

Contents (Top page) Detailed Contents

Index

Nomenclature

Menus and Settings

Troubleshooting

Memory card folder configuration

On Macintosh computers, the folders on camera memory cards are configured as shown below.

Important

• Do not delete image data on a memory card from your Macintosh. Always use the

camera to erase images.

• The same file name cannot be used twice in the same folder. If one of the images is

erased on the camera, that file name is skipped.

• If you use the Energy Saver function and wake your Macintosh up from sleep mode, it

may not be possible to resume communication.

• When you want to edit an image (resizing, rotating, etc.), do not forget to copy the image

to your Macintosh beforehand. If you directly edit the image on the memory card, the
image will no longer be viewable in the camera.

• Do not format memory cards on your Macintosh as this may result in you being unable

to use the memory card in the camera.

100ROBOX

RIF_0001.jpg
RIF_0002.jpg
RIF_0003.avi
RIF_0004.jpg
RIF_0005.jpg

101RORSZ

R_RO0001.jpg
R_RO0002.jpg

.
.
.
R_RO9999.jpg

MISC *2

Still image/Movie

The same file name cannot be used twice in the same
folder.
If one of the images is erased on the camera, that file
name is skipped.

This folder is created when DPOF print settings are
specified (

p.122).

Resized images are recorded here.

*1 DCIM: Digital Camera IMage
*2 MISC: Miscellaneous

DCIM *1

untitled

Summary of Contents for Dk4010




























































































































































































Search results

Summary of Contents for Dk4010

Reviews:

Related manuals for Dk4010

Brands by name

Popular brands

Rollei Dk4010, User Manual

Search results

Summary of Contents for Dk4010

Reviews:

Related manuals for Dk4010

Brands by name

Popular brands