Rollei Dk4010 User Manual Download

Page: 140 / 187

Introduction

Getting Ready

Taking Pictures

Playback

Set Up

GB-140

Viewing Still Images | Viewing Movies | [

] Viewing Images Automatically as a Slideshow (slideshow) | [

] Viewing Multiple Images | [INFORMATION] Viewing Image Information | [

]/[

] Erasing Unwanted

Images | [

] Protecting Images from Accidental Erasing (PROTECT) | [

] Adding Voice Messages to Still Images (POSTRECORDING) | [

] Resizing and Trimming Images (RESIZE) | [

] Rotating an Image |

[

] Using DPOF to specify print settings | [

] Printing by Connecting the Camera Directly to a Printer (PictBridge) |

Connecting to a Windows PC

| Connecting to a Macintosh

NEXT

BACK

Contents (Top page) Detailed Contents

Index

Nomenclature

Menus and Settings

Troubleshooting

Memory card folder configuration

On Windows PCs, the folders for camera memory cards are configured as shown below.

Important

• Do not delete image data on a memory card from your PC. Always use the camera to

erase images.

• The same file name cannot be used twice in the same folder. If one of the images is

erased on the camera, that file name is skipped.

• If you use the Suspend-Resume function or wake your PC up from sleep mode, it may

not be possible to resume communication.

• When you want to edit an image (resizing, rotating, etc.), do not forget to copy the image

to your PC beforehand. If you directly edit the image on the memory card, the image will
no longer be viewable in the camera.

• Do not format memory cards on your PC as this may result in you being unable to use

the memory card in the camera.

Still image/Movie

The same file name cannot be used twice in the same
folder.
If one of the images is erased on the camera, that file
name is skipped.

This folder is created when DPOF print settings are
specified (

p.122).

Resized images are recorded here.

100ROBOX

RIF_0001.jpg
RIF_0002.jpg
RIF_0003.avi
RIF_0004.jpg
RIF_0005.jpg

101RORSZ

R_RO0001.jpg
R_RO0002.jpg

.
.
.
R_RO9999.jpg

DCIM *1

MISC *2

*1 DCIM: Digital Camera IMage
*2 MISC: Miscellaneous

Removable Disk

Summary of Contents for Dk4010




























































































































































































Search results

Summary of Contents for Dk4010

Reviews:

Related manuals for Dk4010

Brands by name

Popular brands

Rollei Dk4010, User Manual

Search results

Summary of Contents for Dk4010

Reviews:

Related manuals for Dk4010

Brands by name

Popular brands