40
Menu List
USB MEMORY Menu
Menu item
Value
(bold text: default value)
Explanation
LOAD SETTINGS
[EXEC]
Shows a list of the setting files (.VR1) that are on the USB flash drive.
You can select a setting file and load the settings into the unit. The current settings are overwritten.
SAVE SETTINGS
[EXEC]
Shows a list of the setting files (.VR1) that are on the USB flash drive.
You can select a setting file and then save the current settings by overwriting them onto the selected
file.
SAVE SETTINGS AS
[EXEC]
Saves the current settings to the USB flash drive as a new file. A file name of “SYS + four-digit
consecutive number.VR1” is assigned as the file name.
Content that is not saved to the file
5
The SYSTEM menu settings “TEST PATTERN” and “TEST TONE.” The unit always starts with these “OFF.”
5
The still images loaded into the unit. Only the file names of the still images are saved.
5
The state of the [ON AIR] button. The unit always starts with this lit.
5
The state of an AUDIO EFFECTS button to which “PLAYBACK (BGM/SE)” is assigned. The unit always
starts with this off.
5
The positions of the volume knobs and faders.
LOAD STILL IMAGE
1
, 2
Specifies the loading destination for the still image (internal memory 1 or 2).
When you press the [VALUE] knob, a list of the still images saved in the root directory of the USB flash
drive is shown. You can select a still image and load it into the unit.
Formats supported for loading
Format
Windows Bitmap File (.bmp), 24-bit color, uncompressed
Resolution
Maximum 1920 x 1200 pixels
File name
Up to eight single-byte alphanumeric characters
* The extension “.bmp” must be added.
* The still image is temporarily saved in internal memory. When you turn off the power, the still image
is deleted.
* An internal memory in which a still image is loaded is indicated by a “ ” symbol.
* You can make the previously-loaded still image be automatically loaded when the VR-1HD starts.
Save the same file in the root directory of the USB flash drive, and start the VR-1HD with the USB flash
drive connected.
FORMAT
[EXEC]
Formats the USB flash drive.
