Roland VR-1HD, Reference Manual

Page: 33 / 48

33
Menu List
ON AIR Menu
Menu item Value
(bold text: default value)
Explanation
OFF COLOR BLACK , WHITE Specifies the background color (black, white) used when fading-in/out the main output video.
AUDIO FADE
Specifies the operation when the [ON AIR] button is pressed.
OFF
Only the video fades-in/out.
ON The video and audio fade-in/out together.
AUDIO INPUT Menu
Menu item Value
(bold text: default value)
Explanation
MIC 1, 2
Adjusts the audio that is input from the MIC 1 and 2 jacks.
HEAD AMP GAIN 0– 36 –64dB Adjusts the input gain (sensitivity) in the analog domain.
DIGITAL GAIN -42.0–
0 0
–42.0dB
Adjusts the input gain (sensitivity) in the digital domain (after conversion from analog to
digital).
LEVEL
-INF–
0 0
–10.0dB Adjusts the input volume.
MUTE OFF , ON Turns the mute function on/off. If this is “ON,” the audio is temporarily silenced.
SOLO OFF , ON
Turns the solo function on/off. Only the audio for which this is “ON” is heard in the headphones.
* The solo function applies to the headphone output. It does not affect output other than the
headphones.
REVERB SEND -INF– 0 0 –10.0dB Adjusts the amount of audio sent to reverb.
AUX SEND -INF–
0 0
–10.0dB Adjusts the amount of audio sent to the AUX bus.
DELAY
0 0
–500.0ms (*6)
( 0 0 –29.9/25.0frame)
Adjusts the delay time of the audio.
Effect Delays the output of the audio by the specified time.
PAN LEFT– CENTER –RIGHT Adjusts the stereo position (pan).
HOWLING CANCELLER OFF
, ON
Turns the howling canceller function on/off. If this is “ON,” howling (acoustic feedback) is
suppressed.
DYNAMICS
(OFF, ON) Press the [VALUE] knob to access the DYNAMICS menu.
GATE OFF , ON
Turns the noise gate on/off.
Effect
Eliminates audio that is lower than the specified threshold level. This is effective when
the noise that you want to remove is separate from the audio that you want to keep,
and can be used to remove hiss or other noise that is heard during periods of silence.
GATE THRESHOLD -80.0–
-50 0
–0.0dB Specifies the level used as the threshold for removing audio.
GATE RELEASE 30–
860
–5000ms
Specifies the length of time until the audio is fully attenuated after audio falls below the
threshold.
COMP/LMT OFF
, ON Turns the compressor or limiter on/off.
COMP/LMT TYPE
Selects the compressor or limiter.
COMP1
This compressor is suitable for music.
Effect
Audio that exceeds the specified threshold level is compressed. This reduces the
difference between the maximum volume and minimum volume, making the audio
more comfortable for listening.
COMP2 This compressor is suitable for voice. Its effect applies more quickly than “COMP1.”
LIMITER
This is a limiter.
Effect Audio that exceeds the specified threshold level is compressed. This prevents
distortion from occurring when unexpectedly loud audio is input.
* Distortion will occur if audio that exceeds the allowable range of the limiter is input.
COMP/LMT THRESHOLD
-80.0–
-50 0
–0.0dB Specifies the threshold at which the compressor/limiter applies.
EQ (OFF, ON) Press the [VALUE] knob to access the EQ (equalizer) menu.
SW OFF , ON
Turns the equalizer on/off.
Effect Adjusts the tone quality for each frequency band.
HI
-15.0–
0 0
–15.0dB Boosts or attenuates the high band.
HI FREQ 1.00– 10 0 –20.0kHz Adjusts the center frequency when changing the tone quality in the high band.
MID -15.0– 0 0 –15.0dB Boosts or attenuates the middle band.
MID FREQ 20.0Hz–
500Hz
–20.0kHz Adjusts the center frequency when changing the tone quality in the middle band.
MID Q
0.5–
1 0
–16.0 Adjusts the width of the frequency band when boosting or attenuating the middle band.
LO -15.0– 0 0 –15.0dB Boosts or attenuates the low band.
LO FREQ 20.0– 100 –500Hz Adjusts the center frequency when changing the tone quality in the low band.
(*6) The number of frames shown in parentheses differs depending on the SYSTEM menu’s “FRAME RATE” setting.