Roland VR-1HD, Reference Manual

Page: 34 / 48

34
Menu List
Menu item Value
(bold text: default value)
Explanation
HPF 75Hz OFF , ON
Turns the high-pass filter on/off.
Effect Cuts off unneeded low-band audio. The cutoff frequency is 75 Hz.
LOAD PRESET
Press the [VALUE] knob to see a preset list for the effects (high-pass filter, equalizer). When you select a preset, the settings
of each effect are overwritten.
DEFAULT Flat settings that do not apply any effect.
WIND NR Reduces wind noise.
VIBRATION NR Reduces vibration and other low-frequency noise.
LIP NR
Reduces noises produced by the lips when speaking or singing. This is appropriate for vocal
input.
SPEECH Makes a spoken voice easier to understand.
VOCAL Enhances a singing voice.
P48V (OFF, ON) Indicates the on/off status of the [PHANTOM] switch.
LINE
Adjusts the audio that is input from the LINE IN jacks.
DIGITAL GAIN -42.0– 0 0 –42.0dB Adjusts the input gain (sensitivity).
LEVEL
-INF–
0 0
–10.0dB Adjusts the input volume.
MUTE OFF , ON Turns the mute function on/off. If this is “ON,” the audio is temporarily silenced.
SOLO OFF , ON
Turns the solo function on/off. Only the audio for which this is “ON” is heard in the
headphones.
* The solo function applies to the headphone output. It does not affect output other than
the headphones.
REVERB SEND
-INF–
0 0
–10.0dB Adjusts the amount of audio sent to reverb.
AUX SEND -INF– 0 0 –10.0dB Adjusts the amount of audio sent to the AUX bus.
DELAY
0 0 –500.0ms (*7)
(
0 0
–29.9/25.0frame)
Adjusts the delay time of the audio.
Effect Delays the output of the audio by the specified time.
EQ (OFF, ON) Press the [VALUE] knob to access the EQ (equalizer) menu.
SW OFF , ON
Turns the equalizer on/off.
Effect Adjusts the tone quality for each frequency band.
HI -15.0– 0 0 –15.0dB Boosts or attenuates the high band.
HI FREQ 1.00– 10 0 –20.0kHz Adjusts the center frequency when changing the tone quality in the high band.
MID -15.0–
0 0
–15.0dB Boosts or attenuates the middle band.
MID FREQ 20.0Hz– 500Hz –20.0kHz Adjusts the center frequency when changing the tone quality in the middle band.
MID Q 0.5–
1 0
–16.0 Adjusts the width of the frequency band when boosting or attenuating the middle band.
LO -15.0– 0 0 –15.0dB Boosts or attenuates the low band.
LO FREQ 20.0– 100 –500Hz Adjusts the center frequency when changing the tone quality in the low band.
HDMI 1–3
Adjusts the audio that is input from the VIDEO INPUT 1–3 connectors.
DIGITAL GAIN -42.0– 0 0 –42.0dB Adjusts the input gain (sensitivity).
LEVEL
-INF–
0 0
–10.0dB Adjusts the input volume.
MUTE OFF , ON Turns the mute function on/off. If this is “ON,” the audio is temporarily silenced.
SOLO OFF , ON
Turns the solo function on/off. Only the audio for which this is “ON” is heard in the
headphones.
* The solo function applies to the headphone output. It does not affect output other than
the headphones.
REVERB SEND
-INF–
0 0
–10.0dB Adjusts the amount of audio sent to reverb.
AUX SEND -INF– 0 0 –10.0dB Adjusts the amount of audio sent to the AUX bus.
DELAY
0 0
–500.0ms
( 0 0 –29.9/25.0frame)
Adjusts the delay time of the audio.
Effect Delays the output of the audio by the specified time.
EQ (OFF, ON Press the [VALUE] knob to access the EQ (equalizer) menu.
SW
OFF
, ON
Turns the equalizer on/off.
Effect Adjusts the tone quality for each frequency band.
HI
-15.0–
0 0
–15.0dB Boosts or attenuates the high band.
HI FREQ 1.00– 10 0 –20.0kHz Adjusts the center frequency when changing the tone quality in the high band.
MID
-15.0–
0 0
–15.0dB Boosts or attenuates the middle band.
MID FREQ 20.0Hz– 500Hz –20.0kHz Adjusts the center frequency when changing the tone quality in the middle band.
MID Q 0.5–
1 0
–16.0 Adjusts the width of the frequency band when boosting or attenuating the middle band.
LO -15.0– 0 0 –15.0dB Boosts or attenuates the low band.
LO FREQ 20.0– 100 –500Hz Adjusts the center frequency when changing the tone quality in the low band.
(*7) The number of frames shown in parentheses differs depending on the SYSTEM menu’s “FRAME RATE” setting.