Roland RG-7, Owner'S Manual

Page: 68 / 124

66
Chapter 3. Performance
Playing Different Tones with the Left
and Right Hands (Split Performance)
Dividing the keyboard into right-hand and left-hand areas, then playing different
sounds in each is called “Split performance.” The boundary key is called the “split
point.”
The split point key is included in the left-hand keyboard area. Each time power to
the keyboard is turned on, the split point is reset to “F#3.”
fig.01-
1
Select a tone (p. 53).
2
Press the [Function] (Exit) button, getting its indicator to light.
3
Press the [Song] (Select -) button or [ ] () button to display
the SPLIT screen.
fig.
4
Press the [Song] (Select -) button or [ ] () button to get the
value for “Split” to flash.
fig.
5
Press the [ ] (Value -) or [ ] (Value +) button to select “On.”
The keyboard is divided into right-hand and left-hand areas.
The tone played prior to Split Play is selected for the right hand, and a suitable tone
to match that tone is selected for the left hand automatically.
6
To exit Split mode, press the [ ] (Value -) button or [ ] (Value +)
button to set the “Split” setting to “Off.”
You can change the split point;
refer to “Changing the
Keyboard’s Split Point” (p. 67).
Split Point
(Factory setting: F 3)
C1 D1 E1 F1 G1 A1 B1 A0 B0 C2 C3 C4 C5 C8 B7
…
Left-hand Tone Right-hand Tone
You can switch Split mode on
and off by holding down the
tone button and pressing the
[Song] button.
The Tone screen appears as
shown below when the Split
function is on.
Pressing a tone button once
more cancels the Split function.
For more about the tones with
which this setting is enabled,
refer to the “Tone List” (p.
107).
RG-7_e.book 66 ページ ２００７年１２月２１日 金曜日 午前９時２４分