Roland RG-7, Owner'S Manual

Page: 55 / 124

53
Chapter 3. Performance
Performing with a Variety of Sounds
The RG-7 contains 20 different internal tones. The tones are organized into five tone
groups, which are assigned to the Tone buttons.
fig.01-
Selecting a Tone Group
1
Press any Tone button.
The indicator of the button you pressed will light.
When you play the keyboard, you will hear a sound in the selected tone group.
Selecting Variation Tones
2
While holding down the Tone button and the [ ] (Value -) or [ ]
(Value +) button to select the tone.
The tone name appears in the display.
fig.01-
The tone you’ve selected is heard when you finger the keyboard.
Some tones are assigned a pair of tones, which allow you to perform with two tones
layered together.
Piano 1 Piano 2 Harpsichord
1 Superior Grand 1 Natural Grand 1 Harpsichord
2
Superior Grand + Str
2
Natural Grand + Str
2
Coupled Harpsichord
3 Superior Grand + Pad 3 Natural Grand + Pad 3 Harps Choir
4
Piano + FM E.Piano
4
Piano + Bell
4
Harps Str
Vibraphone E.Piano
1 Vibraphone 1 Electric Piano
2
Bell
2
FM E.Piano
3 Harp 3 '60s Electric Piano
4
Electric Piano + Pad
4
Electric Piano + Str
The factory settings have tone
demos registered in the
“Favorites” (p. 25). You can
check and confirm the internal
tones.
You can delete tone demos in
the “Favorites” and overwrite
them by saving other songs in
their place. If you want to play
back tone demos after they
have been deleted, initialize
the User Memory to restore the
factory settings (p. 92).
You can also switch the Split
function (p. 66) on and off by
holding down a tone button
and pressing the [Song]
button. The Tone screen
appears as shown below when
the Split function is on.
Pressing a tone button once
more cancels the Split function.
RG-7_e.book 53 ページ ２００７年１２月２１日 金曜日 午前９時２４分