manualshive.com logo in svg

Roland RG-7, Owner'S Manual

Share
Download
Roland RG-7 Owner'S Manual Download Page 48

 

46

Chapter 1. Playing Back Songs

 

6.

 

Press the [

] (Value -) button or [

] (Value +) button to select 

“Saved Song to Delete.”

 

7.

 

Press the [Song] (Select -) button or [

] () button to get the 

“song number” to flash.

 

fig.

 

8.

 

Press the [

] (Value -) button or [

] (Value +) button to select the 

song to be deleted.

 

9

 

Press the [Moving Key] (Enter) button.

 

f

 

A confirmation message appears in the screen.

To return to the original screen without deleting the song, press the [Function] (Exit) 

button.

 

10

 

Press the [Moving Key] (Enter) button once more.

 

The song is deleted.

 

11.

 

Press the [Function] (Exit) button so the indicator goes out.

 

Value

Description

Favorites

 

Deletes the songs in the “Favorites.”

 

Ext Memory

 

Deletes the songs in the USB memory.

NOTE

When deleting performances 

saved to USB memory, do 

not remove the USB memory 

device until deleting is 

finished.

RG-7_e.book 46 ページ ２００７年１２月２１日　金曜日　午前９時２４分

Summary of Contents for RG-7





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands