manualshive.com logo in svg

Roland RG-7, Owner'S Manual

Share
Download
Roland RG-7 Owner'S Manual Download Page 70

 

68

Chapter 3. Performance

 

Adding Reverberation to the Sound 

 

(Reverb)

 

Apply a reverb effect to the notes you play with the RG-7.

Reverb makes it sound as if you are playing in a concert hall.

 

1.

 

Press the [Function] (Exit) button so the indicator is lit.

 

2.

 

Press the [Song] (Select -) button or [

] () button to display 

the EFFECT screen.

 

fig.

 

3.

 

Press the [Song] (Select -) button or [

] () button to get the 

value for “Reverb” to flash.

 

fig.

 

4.

 

Press the [

] (Value -) button or [

] (Value +) button to change the 

amount of reverb applied.

 

5.

 

Press the [Function] (Exit) button so the indicator goes out.

 

Value

Description

0–127

 

Increasing the value results in a deeper reverb effect.
No reverb is applied when the value is set to “0.”

You can save this setting in the 

RG-7’s memory using the 

Memory Backup function (p. 

72).

RG-7_e.book 68 ページ ２００７年１２月２１日　金曜日　午前９時２４分

Summary of Contents for RG-7





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands