Roland RG-7 Owner'S Manual Download

Page: 86 / 124

Chapter 5. User Program Registration

Press the [

] (Value -) button or [

] (Value +) button to select the

“User Program to be loaded.”

Press the [Moving Key] (Enter) button.

Press the [Song] (Select -) button or [

] () button so that the

“load User Program number” is flashing.

fig.

Press the [

] (Value -) button or [

] (Value +) button to select the

number for the User Program to be loaded.

Press the [Moving Key] (Enter) button.

A confirmation message appears in the screen.

fig.

To return to the original screen without loading the User Program, press the

[Function] (Exit) button.

Press the [Function] (Exit) button so the indicator goes out.

The selected User Program is loaded to the RG-7.

Display

Description

User Memory

Loads User Programs saved in the User Memory.

Ext Memory

Loads User Programs saved in USB Memory.

NOTE

When calling up User

Programs saved in USB

memory, do not to remove

the USB memory from the

Ext Memory port until the

settings have been called

up.

RG-7_e.book 84 ページ２００７年１２月２１日　金曜日　午前９時２４分

Summary of Contents for RG-7





























































































































Search results

Summary of Contents for RG-7

Reviews:

Related manuals for RG-7

Brands by name

Popular brands

Roland RG-7, Owner'S Manual

Search results

Summary of Contents for RG-7

Reviews:

Related manuals for RG-7

Brands by name

Popular brands