manualshive.com logo in svg

Roland RG-7, Owner'S Manual

Share
Download
Roland RG-7 Owner'S Manual Download Page 50

 

48

Chapter 2. Using the RG-7 with an External Display or Television

 

3

 

Switch on the RG-7.

 

4

 

Switch on the connected display.

 

Turning the Power Off

 

After use, turn off the power using the following procedure.

 

1

 

Turn the volume all the way down on the RG-7.

 

2

 

Turn off the RG-7.

 

3

 

Turn off the connected display.

 

■

 

Changing the Display Settings

 

1.

 

Press the [Function] (Exit) button so the indicator is lit.

 

2.

 

Press the [Song] (Select -) button or [

] () button to display 

the EXT DISPLAY screen.

 

fig.

 

3.

 

Press the [Song] (Select -) button or [

] () button so that the 

display setting is flashing.

 

fig.

 

4.

 

Press the [

] (Value -) button or [

] (Value +) button to select 

“VGA.”

 

5.

 

Press the [Function] (Exit) button so the indicator goes out.

 

Images are now displayed in the screen of the connected external display.

When you press the [DISPLAY] button on the remote control, the content being 

displayed switches to the external display.

To change the settings indicated in the display (Song Select screen 

 

→

 

 Lyrics screen 

 

→

 

 

Slide show 

 

→

 

 Notation 

 

→

 

 Song Select screen...), refer to “Selecting What is To Be 

Displayed on the External Display or Television” (p. 50).

For more on handling the 

external display, refer to your 

display’s owner’s manual.

You can save this setting in the 

RG-7’s memory using the 

Memory Backup function (p. 

72).

RG-7_e.book 48 ページ ２００７年１２月２１日　金曜日　午前９時２４分

Summary of Contents for RG-7





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands