manualshive.com logo in svg

Roland RG-7, Owner'S Manual

Share
Download
Roland RG-7 Owner'S Manual Download Page 115

 

113

Main Specifications

 

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

 

Connectors

Main Output jacks (L/Mono, R), Balanced Output jacks (L, R)(XLR, Level Fixed), 
Aux Output jacks (L/Mono, R), Main Input jacks (L/Mono, R), Aux Input jacks (L, R), 
Mic jack, Phones jack (Stereo) x 2, MIDI connector (IN/OUT), USB connector (MIDI), 
Ext Display connector, Video Out jack, AC Inlet, Ext Memory Port

Power Supply

AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)

Power Consumption

260 W

Dimensions

1,460 (W) x 1,400 (D) x 1,750 (H) mm                     (top opened)   
57-1/2 (W) x 55-1/8 (D) x 68-15/16 (H) inches

1,460 (W) x 1,400 (D) x 1,010 (H) mm                     (top closed)
57-1/2 (W) x 55-1/8 (D) x 39-13/16 (H) inches

Weight

225 kg / 497 lbs

Accessories

Owner’s Manual, USB Installation Guide, Power Cord,
CD (Music Disc with Vocals), CD-ROM (Roland Digital Piano USB Driver),
Maintenance Kit, Key Cover, Remote Control, Dry-cell Batteries

Options

USB Memory

 

RG-7

RG-7_e.book 113 ページ ２００７年１２月２１日　金曜日　午前９時２４分

Summary of Contents for RG-7





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands