manualshive.com logo in svg

Roland RG-7, Owner'S Manual

Share
Download
Roland RG-7 Owner'S Manual Download Page 25

 

23

Before You Start Playing

 

4.

 

Secure the anti-theft lock with the screws as shown 

below.

NOTE

 

Be sure to replace removed screws when securing the 
anti-theft lock.

 

About the Screens

 

Immediately after the power is turned on, the Song Select 
screen like the one below is displayed.

 

■

 

Main Screens

 

Song Select Screen

 

When you press the [Song] button, the following screen is 
displayed. Each time you press the [Song] button in this 
screen, the song genre is switched.

 

Function Screen

 

Press the [Function] (Exit) button; the indicator lights, and 
the following screen appears.

 

Tone Screen

 

Press the Tone button; the indicator lights, and the following 
screen appears.

 

■

 

Adjusting the Contrast of the 
Screen

 

1.

 

Rotate the LCD Contrast knob on the jack panel at the 

lower left of the instrument.

Screws

RG-7_e.book 23 ページ ２００７年１２月２１日　金曜日　午前９時２４分

Summary of Contents for RG-7





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands