Roland RG-7 Owner'S Manual Download

Page: 29 / 124

Chapter 1. Playing Back Songs

Playing Back One Song

To play a single selected song, use the following procedure.

Press the [Function] (Exit) button, getting its indicator to light.

Press the [Song] (Select -) button or [

] () button to display

the PLAY screen.

fig.

Press the [Song] (Select -) button or [

] () button to get the

value for “Mode” to flash.

fig.

Press the [

] (Value -) button or [

] (Value +) button to select

“One Song.”

Press the [Function] (Exit) button so the indicator goes out.

Value

Description

All Song

All of the songs in the genre are played back in sequence,
starting from the selected song. When the final song in the
selected genre is finished playing, playback then
automatically resumes from the first song in that genre.

One Song

Only the selected song is played.
Playback stops when the song is finished.

You can save this setting in the

RG-7’s memory using the

Memory Backup function (p.

72).

RG-7_e.book 27 ページ２００７年１２月２１日　金曜日　午前９時２４分

Summary of Contents for RG-7





























































































































Search results

Summary of Contents for RG-7

Reviews:

Related manuals for RG-7

Brands by name

Popular brands

Roland RG-7, Owner'S Manual

Search results

Summary of Contents for RG-7

Reviews:

Related manuals for RG-7

Brands by name

Popular brands