Roland RG-7 Owner'S Manual Download

Page: 83 / 124

Chapter 5. User Program Registration

Saving the User Program Sets

The 36 separate configurations of User Programs registered in the RG-7 can be saved

as sets in User Memory (p. 25) or to USB memory (sold separately).

When saving the settings to USB memory, connect the USB memory to the Ext

Memory port (p. 22).

Press the [Function] (Exit) button, getting its indicator to light.

Press the [Song] (Select -) button or [

] () button to display

the USER PROGRAM screen.

fig.

Press the [Song] (Select -) button or [

] () button so “SAVE” is

flashing.

fig.

Press the [Moving Key] (Enter) button.

The following screen appears.

fig.

Press the [Song] (Select -) button or [

] () button so that the

“User Program save destination” is flashing.

fig.

Press the [

] (Value -) button or [

] (Value +) button to select the

“User Program save destination.”

Display

Description

User Memory

The User Program is saved in User Memory.

Ext Memory

The User Program is saved in USB Memory.

You can restore the content in

the User Memory to the

original default factory

settings. Refer to “Restoring

the Factory Settings (Factory

Reset)” (p. 73).

NOTE

Use USB memory available

from Roland. Proper operation

cannot be guaranteed if other

external memory products are

used.

RG-7_e.book 81 ページ２００７年１２月２１日　金曜日　午前９時２４分

Summary of Contents for RG-7





























































































































Search results

Summary of Contents for RG-7

Reviews:

Related manuals for RG-7

Brands by name

Popular brands

Roland RG-7, Owner'S Manual

Search results

Summary of Contents for RG-7

Reviews:

Related manuals for RG-7

Brands by name

Popular brands