54
Midi Data
Function
Transmitted
Recognized
Notes
Basic Channel
1-16
1-16
If Omni selected the Kiwi106 will recognize any midi channel
Note Number
24(C1)-108(C8) 0-127
Notes that are received outside the Kiwi106 range of 24-108
are transposed to the nearest octave within range.
Mode
O
O
Voice Modes need to be changed using Midi Control or Sysex
commands
Velocity
Note On
Note Off
X
X
X
X
Midi Note Velocity can be disabled using Global Dynamics
Variable. If disabled midi notes will use the Internal
Velocity Level.
Aftertouch
Keys
Channels
X
X
X
X
Pitch Bender
O
O
Midi and internal bends are additive within the Kiwi106.
Control Change
O
O
Only if Midi CC option is Enabled. See Control Change Tables
for details
Program Change
O
0-127
If CC0=0 then CC32 & Program change select Tone 1-512. Each
CC32 number (0 - 3) accesses 128 Tonees using Program Change
(0-127)
System Exclusive
O
O
Only if Midi Sysex option is Enabled - See Sysex Table for
details
Note – The editor uses sysex and will override the sysex
disable setting while it is in use.
System Real Time Clock
Commands
O
O
Will Transmit from Master Clock if Clock Output is enabled.
Input clocks are passed through to midi out unaltered and with
minimal delay. Midi Clocks are recognized within the Kiwi106
only if the clock source has been set to midi on the Master
clock source
Modulation
O
O
Midi and internal Modulation are additive within the Kiwi106
Notes
X=No
O=Yes
Supported Midi
Messages
Status
Second
Third
Notes
Note Off
$8n (128-143) $kk
$yy
n
=
0-15 midi channel
kk =
note number (0-127) - Notes outside range 24-108 are
transposed to the nearest octave
yy
=
Don't care (ignored)
Note On
$9n (144-159) $kk
$yy
n
=
0-15 midi channel
kk =
note number (0-127)-outside 24-108 are transposed to
the nearest Octave
yy
=
0=Note Off, 1-127 = Note Velocity. Notes are sent at
velocity set by Global Parameter
Continuous Controllers
$bn (160-191) $kk
$yy
n
=
0-15 midi channel
$kk & $yy
see CC table
Program Change
$cn (192-207) 0-127
n
=
0-15 midi channel
If CC0 =
0 then
for CC32 =
0 for Tones 1-128
1 for Tones 129-256
Channel Aftertouch
$dn (208-223) $kk
---
Pitch Bend
$en (224-239) $kk
$yy
n
=
0-15 midi channel
kk
=
Least Significant 7 bits
yy
=
Most Significant 7 bits
Note - Midi pitch bend is mixed with internal bend
Internal hardware can only support 12 bits so the 2
LSB are dropped
Note $xx = hex number
www.kiwitechnics.com
JX-8P Upgrade User Manual v130
