AT-AT-AT
Eurorack DIY Kit Instructions
Page 1
AT-AT-AT Triple Passive Attenuator
OVERVIEW
For the most recent version of this
document please visit
https://www.thonk.co.uk/shop/at-at-at/
All Thonk kits are sold under our
standard
Terms
and Conditions -
DIY INSTRUCTIONS
This document gives detailed instructions that assume you have purchased a
complete kit from
. It also assumes no previous knowledge of
electronics. To learn to solder try
and the
Adafruit
guide to excellent soldering
–
Watch and understand that whole YouTube video! If you’re not achieving the results
shown in the video then you need to buy new tools or seek advice.
You will not
end up with a working module otherwise.
TOOLS REQUIRED
Soldering iron, snipe nose pliers, wire strippers, small flat head screwdriver and
diagonal cutters AKA snips AKA side-cutters. A Digital Multimeter is always helpful
for checking for bad solder joints and continuity. Thonk sell a range of inexpensive
tools here -
April 2022
Version 2.0
