36
SEQ Step Timing
438 Seq Step Timing
The Seq Clock Timing can be set to 1
of 13 options. These are:
Half Note (48 Clocks/Step)
Quarter note (24 Clocks/Step)
8th note (12 Clocks/Step)
8th note, half swing (14,10
Clocks/Step)
8th note, full swing (16,8
Clocks/Step)
8th note triplets (8 Clocks/Step)
16th note (6 Clocks/Step)
16th note, half swing (7,5
Clocks/Step)
16th note, full swing (8,4
Clocks/Step)
16th note triplets (4 Clocks/Step)
32nd note (3 Clocks/Step)
32nd note triplets (2 Clocks/Step)
64th note triplets (1 Clocks/Step)
ENV ADSR
511 – 514 Env 1 ADSR
516 – 521 Env 2 ADSR
523 – 526 Env 3 ADSR
Range is 0-127
ENV KEY
515 - Env 1 Key
522 - Env 2 Key
527 - Env 3 Key
Range is 0-127
This parameter will Decrease the Env
stage rate below middle C and increase
the stage rate above middle C
Note – these are not currently
operational and will have no effect
Quick Edit Assign
531 Quick Edit Assign
This parameter assigns a parameter
number to the Quick Edit Button.
Pressing the QE button allows a
shortcut to the parameter to be edited.
This is saved with the Tone.
Mod Wheel
Destination
536 Mod Wheel Destination
The Parameter injects LFO into the
destination selected at the level set in
536
To set the LFO used to other than
LFO1, or more than one output, sysex
must be used. The editor can do this.
MW Destination options are
OFF – MW will have no effect
DCO - DCO 1 & 2
VCF - VCF Cutoff
VCA - VCA Level
Mod Wheel Level
537 Mod Wheel Level
Range 0-127
The mod wheel in the JX-8P is a simple
on/off switch. This parameter lets the
level to be set
www.kiwitechnics.com
JX-8P Upgrade User Manual v130
