17
RED BUTTONS
TONE 1-8
Edit Letters “O-V”
These buttons will select Tones 1 to
8. The Tone will immediately load.
The same tone that is selected when
the synth is switched off will
automatically loaded when the Kiwi-
8P is switched on.
Note - If the tone being used when
the synth is powered off has an Arp
or Sequence running when it is
saved it will automatically start
running when the synth is powered
on or the Tone is loaded.
When writing a Tone these buttons
will select the Tone number that the
Tone will be stored under. The Tone
will be written to memory when the
Tone Button is pressed.
Note – Write protect must be off to
write a tone to memory. A MEM
PROTECTED message will show on
the display if a write is attempted
with the protect on.
To Load a sequence the SEQ SELECT
button must be pressed before the
Tone button.
During Name Editing these buttons
will select the letters O to V
www.kiwitechnics.com
JX-8P Upgrade User Manual v130