12
CONTROL BUTTONS
CHORD BUTTON
Edit Letter “-”
The CHORD button allows Chords
to be set or cleared. To set a chord
play the chord near middle C &
press and release the CHORD
button while the keys are being
held. The Chord Light will be lit
when a chord is set.
Each note played with the chord set
will be used as the base note for the
chord. Keying will behave the same as
Unison or Solo and some keying
mode parameters will not have any
effect.
To clear a chord press and release the
Chord Button with no keys pressed.
The Chord light will turn off.
During Name Editing this button will
select the letter - (Minus)
GLOBAL TEMPO
BUTTON
Edit Letter “,”
The GLOBAL TEMPO BUTTON is
used to set the master internal
clock rate. This is done by pressing
the GLOBAL TEMPO button and
setting the speed using the EDIT
SLIDER. The speed range can be
set from 5 BPM to 299 BPM. Press
the GLOBAL TEMPO Button again
to return to the previous mode.
The Master Clock source can be
selected from one of 2 sources using
Global parameter edit G6B1T2.
1) Internal clock
2) Midi
During Name Editing this button will
select the letter , (Comma)
KEY TRANSPOSE
Edit Letter “Z”
The Kiwi-8P Key Transpose can be
changed using this button.
While the Key Transpose Button is
pressed, press the note you wish to
transpose to on the keyboard. Then
release the Key Transpose button.
The current transpose will show on
the display while the button is
pressed.
It is also possible to step the
transpose up and down using the
left & right arrow buttons while the
Key Transpose button is pressed
During Name Editing this button will
select the letter Z
TAP TIMER
Edit Letter “/”
The internal clock rate can be set
by using this button. Tapping this
button in time with the beat will set
the internal clock to this rate. The
first tap will display “TIMING TAP”
and the second tap will display the
actual BPM that was measured.
During Name Editing this button will
select the letter / (forward slash)
www.kiwitechnics.com
JX-8P Upgrade User Manual v130