33
Chapter 2 - Basic Operation
2-2 Loading Media
4
Fit the right-hand media flange all the way into the hole on the right-hand side of the roll media, and
tighten the retainer screw to secure in place.
5
Move the media clamps to the two ends of the platen.
6
Pass the end of the media from the back of the
machine to the front.
Pull out the media until the sensor is hidden
from view.
7
Grasp the center of the end of the media at the
front of the machine, and slowly pull the media
out straight to the position shown in the figure.
Media
Front
Sensor
Roll media
Media flange (left)
Media flange (right)
Media clamp
Media clamp
