23
Chapter 1 - Getting Started
1-3 Assembling and Installing
Step 4: Remove the Protective Media
The protective media shown below is attached to this machine when it is shipped from the factory. When you have
finished installing the machine, remove all protective media.
Front
2) Peel off the tape.
4) Remove the retainer (1).
6) Peel off the tape.
5) Remove the retainer (2).
3) Peel off the tape,
and remove the
packing. (Pull straight
back toward you to
extract.)
7) Attach the retainer you removed
in step 4) and 5).
Rear
Retainer (1)
Retainer (2)
1) Remove packings.
Packing
Packing
If the screw for the retainer is difficult
to loosen, use a screwdriver to remove
it.
