28
Chapter 1 - Getting Started
1-5 Switching On the Power for the First Time
Step 2: Perform Ink Filling
Make the setting for the ink type on the machine to match the installed ink. You can make the setting for the ink type
when you switch on the power for the first time, or when you switch on the power after removing ink.
Perform Ink Filling
1
Switch on the main power switch on the back
of the machine.
2
Press the [POWER] key on the operation panel.
3
Make sure the cartridges are installed into the
ink-cartridge ports.
Select the installed ink type and press the [EN-
TER] key.
4
Follow the messages to make sure the drain
bottle is installed at the back of the machine.
The ink-filling operation starts.
This operation takes several minutes.
Switch to "I"
SELECT INK TYPE
PIGMENT LcLm
INSTALL
DRAIN BOTTLE
PIGMENT LcLm
: Pigmented ink
(cyan, magenta, yellow, black,
light cyan, and light magenta)
PIGMENT OrGr
: Pigmented ink
(cyan, magenta, yellow, black,
orange, and green)
DYE LcLm
: Dye-based ink
(cyan, magenta, yellow, black,
light cyan, and light magenta)
