Roland E-A7 Reference Manual Download Page 8

Page: 8 / 70

Global Parameters

The settings of the

“Global”

parameters can be saved to the E-A7’s

global memory.
Global parameters are automatically saved when you exit the page

or turn off the power.

Style/SMF Track Mute

See

“Muting a Specific Track (Track Mute)”

on Owner’s Manual: p.

24.

One Touch Lock Setting

This parameter can be selected using

[MENU]

“Global”

“One

Touch Lock Setting ”

The parameters on this page allow you to filter certain

“One Touch”

settings. Select

“On”

for the settings you do not want to load along

with the remaining One Touch settings when you press a ONE

TOUCH button.

Parameter

Value

Tempo

OFF, ON

Keyboard Part

OFF, ON

Key Touch

OFF, ON

Intro/Ending

OFF, ON

Variation

OFF, ON

Bass Inv

OFF, ON

Scale Tune

OFF, ON

Exp Pedal

OFF, ON

Ctrl Pedal

OFF, ON

Assign Sw

OFF, ON

Pad

OFF, ON

User Program Lock Setting

This page can be selected using

[MENU]

“Global”

“User

Program Lock Setting ”

The parameters on this page allow you to filter certain User Program

settings. Select

“On”

for the settings you do not want to load

along with the remaining settings when you select a User Program

memory.

Parameter

Value

Style

OFF, ON

Tempo

OFF, ON

Transpose

OFF, ON

Tone

OFF, ON

Keyboard Part

OFF, ON

Key Touch

OFF, ON

Lower Octave

OFF, ON

Split

OFF, ON

Arr Type

OFF, ON

Bass Inv

OFF, ON

Scale Tune

OFF, ON

Exp Pedal

OFF, ON

Ctrl Pedal

OFF, ON

Assign Sw

OFF, ON

Pad

OFF, ON

If the UPG Lock button is enabled (lit), parameters that are turned

on will be locked.

If you long-press one of the Style category buttons, the Style is

temporarily locked. If you long-press one of the Tone category

buttons, Tone, Lower Octave, and Key Touch are temporarily

locked. If you long-press the Transpose

[+]

[-]

button,

Transpose is temporarily locked.

Fade In/Out Setting

These parameters can be selected using

[MENU]

“Global”

“FadeIn/Out Setting ”

Parameter

Value

Explanation

Time In

0–20s

Use this parameter to change the

Fade In duration.

Time Out

Use this parameter to change the

Fade Out duration.

Time Hold

1–10s

Use this parameter to set how long

it takes for the volume to return to

the master

[VOLUME]

setting after

completing the fade-out.

Metronome Setting

See

“Using the Metronome”

on Owner’s Manual: p. 19.

Input Setting

Parameter

Value

Explanation

Input Gain

-24 dB - 48 dB

Adjusts the input gain. If the input

sound is not loud enough, raise this

setting. (This adjusts L/MONO, MIC -

R Input. It does not adjust the EXT IN

input level.)

IFX Type

OFF, REVERB,

DELAY

Selects the type of input effect.

IFX Edit

Accesses the edit screen of the effect

that’s selected in IFX Type.

IFX Balance

D100:0W–

D0:100W

Specifies the balance between the

original sound (D) and the effect

sound (W).

IFX Switch (

[F5]

button)

Turns the input effect on/off.

Summary of Contents for E-A7






































































Search results

Summary of Contents for E-A7

Reviews:

Related manuals for E-A7

Brands by name

Popular brands

Roland E-A7, Reference Manual

Search results

Summary of Contents for E-A7

Reviews:

Related manuals for E-A7

Brands by name

Popular brands