Roland E-A7 Reference Manual Download Page 10

Page: 10 / 70

Global Parameters

This parameter allows you to tune your E-A7 to acoustic instruments

that cannot be tuned. The default is 440.0 Hz.

Parameter

Value

Master Tune

415.3–466.2 Hz

Output Mode

Parameter

Value

Explanation

Output Mode

OFF, ON

Switches the acoustical character of

the sound that is output from the

Phones jack/Output jacks and the

E-A7’s speakers.

ON (When the button is lit):

Settings are optimized for

the response of the E-A7’s

speakers.

OFF (When the button is unlit):

The Mastering Tools function’s

Compressor and Equalizer

settings will be enabled.

The factory settings (Type:

Standard) or the User settings

are applied.

* The

“Standard”

compressor and equal-

izer type settings are optimal for use

when the Phones jack or Output jacks

are connected to an external speaker

or PA system.

Tone Startup

Parameter

Value

Explanation

Tone Startup

INDONESIA,

VIETNAM, IN-

DIA, THAILAND,

ORIENTAL,

EGYPT, TURKEY,

EAST EUROPE,

ETHNIC,
FRETTED,

PERCUSSION

Specifies the tone list that is first

selected when you press the Tone

Summary of Contents for E-A7






































































Search results

Summary of Contents for E-A7

Reviews:

Brands by name

Popular brands

Roland E-A7, Reference Manual

Search results

Summary of Contents for E-A7

Reviews:

Brands by name

Popular brands