Roland E-A7 Reference Manual Download

Page: 62 / 70

MIDI Parameters

Style Clock Tx

If you activate this option the

style

playback sends MIDI Clock

messages.

Parameter

Value

Style Clock Tx

Off, On

SMF Start/Stop Tx

Similar to

“

Style

Start/Stop Tx”

but for songs.

Parameter

Value

SMF Start/Stop Tx

Off, On

SMF Clock Tx

Similar to

“

Style

Clock Tx”

but for songs.

Parameter

Value

SMF Clock Tx

Off, On

SMF Position Tx

If you switch this parameter on, the song playback sends Song

Position Pointer (SPP) messages that indicate the current playback

position.

Parameter

Value

SMF Position Tx

Off, On

Sync Rx

This parameter is used to specify whether style and song playback

should be synchronized by an external MIDI device.

Parameter

Value

Sync Rx

Off, On

Mode

Parameter

Value

Mode

Internal, Auto, MIDI, Remote

Internal:

Song or

style

playback uses E-A7 internal tempo.

Auto:

A good setting for remote control of song or

style

playback

(using a PK-series dynamic MIDI pedal board, for example). If the E-A7

receives a MIDI Start message (FA), it waits for Clock messages that

specify the tempo. If those Clock messages are not received, the E-A7

starts playback using its internal tempo. If, however, Clock messages

(F8) follow after the Start message, the E-A7 uses the external tempo.

MIDI:

Song or

style

playback can be started or stopped with MIDI

real-time messages (Start, Stop, Clock) received from an external

clock source.

Remote:

Song or

style

playback waits for a start message to start

playback at its own tempo. When it receives a stop message,

playback stops. External clock messages are ignored.

Basic

The following parameters are located on the display page that

can be selected using

[MENU]

“MIDI”

“Edit System”

“Basic ”

The Basic channel is used to receive and transmit Program Change

and Bank Select messages for selecting Performances, as well as for

the reception and transmission of other kinds of messages that are

not directly related to a specific MIDI channel.

NOTE

If you select another channel, messages intended for the Basic

parameters might also cause other parameters to change when

you don’t want them to.
The following parameters are available here:

Switches the transmission of MIDI messages on the Basic channel on

or off.

Parameter

Value

Off, On

Tx Channel

The channel used to transmit MIDI messages.

Parameter

Value

Tx Channel

1–16

Performance PC Tx

This parameter is used to enable or disable the transmission of

program change and bank select messages related to Performance

selection.

Parameter

Value

Performance

PC Tx

Off, On

Part Switch Tx

Whenever you mute or un-mute a part on the

“Style Parts”

page,

the E-A7 transmits an NRPN message that describes your action. Not

sending this message may be useful to keep your external sequencer

from recording it—or the receiving GS module from muting the part

assigned to that MIDI channel.

Parameter

Value

Part Switch Tx

Off, On

Switches the reception of MIDI messages on the Basic channel on or

off.

Parameter

Value

Off, On

Summary of Contents for E-A7






































































Search results

Summary of Contents for E-A7

Reviews:

Related manuals for E-A7

Brands by name

Popular brands

Roland E-A7, Reference Manual

Search results

Summary of Contents for E-A7

Reviews:

Related manuals for E-A7

Brands by name

Popular brands