Manual
Double Sheet Detector R100 I100
for pairs of sensors
Start-up
B0003308 / 1.4 / 13.02.2013
34
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
6.7
Changing the switching thresholds
This function should only be performed, if the factory-set values for the thresholds (85% and 115%)
cannot be used.
Note!
If this function is executed, the external Teach-In will also work with
the changed values.
Preparation
:
A100: Place the sensor on the sheet.
I100: Place the sheet between the sensors.
Step 1
Press the key ”setup“.
Fig. 23: Calling up the setup mode
R100structure.bmp
Step 2
Press the key ”change“.
Fig. 24: Calling up a change
R100TChHandChange.bmp
