26
11 WHAT TO DO IF....
11-1 What to do if....
PNC-1860/1410/1210 troubleshooting
Is the power cord connected correctly?
Connect the power cord included with the PNC-1860/1410/1210 to the unit,
and plug the other end securely into an electrical outlet (see “3-1
Installation and Connections” on page 3).
Is the PNC-1860/1410/1210 power on ?
Turn on the power.
Is the front cover closed?
Close the front cover when performing cutting (see “3-3 Loading a Sheet”
on page 5).
Is the PNC-1860/1410/1210 in the temporary
halt state ? Is operation paused?
If the screen shown at rights is displayed,
it means that operation is paused.
Follow the steps described in " Pausing Cutting"
To resume cutting, use the and keys to select "CONT," then press the
key.To abord cutting, first stop the flow of cutting instructions from the
computer. And use the and keys to select "STOP," then press the
key.
If connected via the serial port, do the
communication parameters for the PNC-
1860/1410/1210 match those of the
computer ?
At the display menus, make the correct settings for the communication
parameters (refer to “3-4 Selecting the Interface” on page 11).
Is the computer set up correctly ?
Check the following items:
• DIP switches • Memory switches • Interface board • Communication
parameters • Other settings
Read the computer user’s manual and set it up correctly.
Are the computer and the PNC-1860/1410/
1210 linked with the right cable ?
The type of cable you need is determined by your computer and the software
you are using. Even if the computer is the same, running different software
may require a different cable. Use the cable specified in your software.
Are the computer and the PNC-1860/1410/
1210 connected correctly?
Correctly connect the computer and the PNC-1860/1410/1210 (see “3-1
Installation and Connections” on page 3).
Is the interface setting correct?
At the display menu, make the correct setting for the interface connecting
the computer and the PNC-1860/1410/1210 (refer to “3-4 Selecting the
Interface” on page 11).
Is the OS set up correctly ?
Check the following items:
• Output port selection • Output device selection • Output port open
• Communication Parameters • Other settings
Check the OS’s user’s manual and set it up correctly.
Are the application software settings
correctly ?
Check the following items:
• Output device specifications (select a device name that matches the
instruction system.
If the wrong device is selected an incorrect instruction may be output,
resulting in an error).
• Communication Parameters • Other settings
Check the software user’s manual and set it up correctly.
PAUSE ON
CONT. STOP VIEW
ENTER
Summary of Contents for Camm-1 Pro GX-640
Page 8: ...v MEMO...
Page 38: ...30 Automatic backspace 13 CHARACTER SET...
Page 41: ...R9 980506...
