3
• Always be careful whenever the unit is in operation, so as not to risk getting fingers or hair caught in its mecha-
nisms.
• If you are using a stand, take care not to make the PNC-1850/1200 tip over. When moving the PNC-1850/1200
always unlock the stand casters and use two or more people to complete the job. Single-handedly attempting to
use excessive force to move the PNC-1850/1200 may cause the unit to tip over, which is dangerous.
• Ensure that the power supply voltage in within
±
10% of the machine's rated voltage.
• Never take apart, or alter the construction of this device.
• Never allow any liquids, metallic objects, or flammable material to get inside the unit.
• Handle the power cord carefully to prevent damage. Never step on or place heavy objects on the cord.
• When pulling the power cord from an electrical socket, be sure to grip the plug to prevent damage to the cord or
cause electrical shorts.
• When the machine is not in use for an extended period, remove the power supply plug from the AC outlet.
Part 1
1-1 PRECAUTION
• Do not subject the machine to bumps, or other severe shocks.
• Never move the tool carriage by hand. Damage and performance inaccuracy may result.
• When the unit is not in use, keep the pinch rollers raised. The pinch rollers may be deformed if left engaged.
1-2 CHECKING ACCESSORIES
Check the following to make sure that you received all the items that were shipped along with the unit.
Blade Holder: 1
Separate Cutter: 1
Tweezers
(for handling sheet): 1
Power Cord: 1
Test-use Sheet: 1
Test-use Application
Tape: 1
Test use Water based
Fiber tipped Pen: 1
Test-use High-quality
Paper: 1
User’s Manual: 1
Blade for Sheet
(Cemented Carbide blade): 1
Sheet Base: 1
* PNC-1200 only
