20
CALIB X CALIB Y
0.00% 0.00%
SMOOTHING
OFF <ON>
UP SPEED
<85cm/s>
SHEET WEIGHT
<LIGHT> HEAVY
WEIGHT UPSPEED
SMOOTH CALIB
REPLOT
START CLEAR
AXIS ROTATION
<0deg> 90deg
AREA LENGTH
MOVE < 1.0m>
1 CUT 50cm/s
0.250mm 30gf
AREA AXIS
REPLOT SUBMENU
1— 8
0—1.000
(in increments of
0.025 mm)
1—85 (in increments of 1 cm/s) * When [HEAVY] is selected for [WEIGHT] : 1—50
30—500
(in increments of 10 gf)
MENU
Use and to change the value.
(Align the blinking
cursor at the item.)
AREA
AXIS
REPLOT
SUBMENU
-24.9 m—+24.9 m (in increments of 0.1 m.)
* When [FEET] is selected for [AREAUNIT] : -82.17—+82.17 (in increments of 0.33 feet)
0deg / 90deg
(Align the blinking cursor at the item.)
CALIB
SMOOTH
UP SPEED
WEIGHT
LIGHT / HEAVY
COMMAND / 1 cm/s — 85 cm/s (in increments of 1 cm/s.)
OFF/ON
-0.19% — 0.19% (in increments of 0.01%.)
to select. (Align the blinking cursor at the item.)
Use
or
ENTER
to enable the setting.
Press
to select.
Use
or
ENTER
Press
to select.
Use
or
ENTER
Press
to select [START] or [CLEAR]
Use
or
ENTER
to enable the setting.
Press
ENTER
Press
to select.
Use
or
ENTER
to enable the setting.
Press
ENTER
Top menu
Align the blinking cursor at the value, press or to change the value, then press to confirm.
After making the setting for [LENGTH], press or to move the blinking cursor to [MOVE] and press
ENTER
Use and to change the value.
MENU
Use and to change the value.
Use
or
ENTER
to enable the setting.
Press
to select.
ENTER
to enable the setting.
Press
Use and to change the value.
ENTER
to enable the setting.
Press
Use and to change the value.
to feed the sheet at the set length.
.
ENGLISH JAPANESE
GERMAN FRENCH
DEMO CUTTING
WIDTH LENGTH
14612 ------
SELECT SHEET
ROLL EDGE PIECE
PNC-1850
Roland DG Corp.
Power on
+ Power on
+ Power on
Openning message
After loading a sheet,
close the front cover.
ROLL/EDGE/PIECE
ENTER
Press
MENU
MENU
to select.
Use
or
MENU
to select.
Use
or
ENTER
to enable the setting.
Press
ENGLISH/JAPANESE/
GERMAN/FRENCH/
SPANISH/ITALIAN
SPANISH ITALIAN
PNC-1200
Roland DG Corp.
See
“2-4 EXPLANATION OF DISPLAY MENUS
” on page 22 for a detailed description of each setting.
Changing the value and pressing the
ENTER
key enables the setting. If you have changed a value but have not yet pressed
ENTER
, you can
abandon the change and return to the original value by pressing the
MEN
U
key.
To return to the menu selection screen from any of the menu value setting screens, press the
MEN
U
key.
2-3
DISPLA
Y
MENUS FLOWCHART
