45
P N C - 1 8 5 0
P N C - 1 2 0 0
Mechanism
Media-movement method
Driving method
Digital control servo motor
Maximum cutting area
Width: 1195 mm (47")
Width: 585 mm (23")
Length: 24998 mm (984-1/8")
Length: 24998 mm (984-1/8")
Acceptable sheet widths
50 mm—1220 mm (1-15/16"—48")
50 mm—762 mm (1-15/16"—30") (*)
Acceptable paper widths
50 mm—1220 mm (1-15/16"—48")
50 mm—762 mm (1-15/16"—30") (*)
Acceptable paper types
High-quality paper
Number of tools
1
Tools
Cutters: special cutter for CAMM-1 series
Pens: Water-based fiber-tipped pens, Thick water-based fiber-tipped pens (options) and
32 color plotter pens (options)
Max. cutting speed
During cutting: 850 mm/sec. (in all directions)
During tool-up: 1202 mm/sec. (in 45° direction)
Cutting speed
10 mm/sec—850 mm/sec (in increments of 10 mm/sec.)
Blade force
30 gf—500 gf (in increments of 10 gf)
Mechanical resolution
0.005 mm/step (Minimum controllable resolution: 0.005 mm x 5 step = 0.025 mm/step)
Software resolution
0.025 mm/step
Distance accuracy
Error of less than +/- 0.2% of distance travelled, or 0.1mm, whichever is grater
Repetition accuracy
0.1 mm or less (excluding stretching/contraction of the sheet)
• Range for assured repetition accuracy (**)
For sheets with a width exceeding 610 mm (24"): Length 4,000 mm (157-7/16") (PNC-1850 only)
For sheets with a width of 610 mm (24") or less : Length 8,000 mm (315-15/16")
Interface
Parallel (Centronics compatible), Serial (RS-232C)
Buffer size
1 Mbyte (Expandable up to 3 Mbyte)
Instruction system
CAMM-GL III (mode1 and mode2)
Switches
Power switch
Control switches
LED
POWER LED, PAUSE LED
Display
Liquid crystal display unit; 16-chracter by 2 lines
Power consumption
1.1A/117V, 0.5A/220-230V, 0.5A/240V
Acoustic noise level
Cutting mode: under 62dB (A) Standby mode: under 40dB (A)
(According to ISO 7779)
Dimensions
1540 mm (W) x 300 mm (D) x 285 mm (H)
945 mm (W) x 300 mm (D) x 295 mm (H)
(60-11/16" (W) x 11-13/16" (D) x 11-1/4" (H))
(37-1/4" (W) x 11-13/16" (D) x 11-5/8" (H))
(1540 mm (W) x 640 mm (D) x 1150 mm (H)
(945 mm (W) x 640 mm (D) x 1132 mm (H)
(60-11/16" (W) x 25-1/4" (D) x 45-5/16" (H)) (with stand))
(37-1/4" (W) x 25-1/4" (D) x 44-5/8" (H)) (with stand))
Weight
36.5 kg (80.5 lb.)
25 kg (55.1 lb.)
(59 kg (130.1 lb.) (with stand))
(43.5 kg (95.9 lb.) (with stand))
Temperature
5—40°C (41—104°F)
Humidity
35%—80% (non-condensing)
Appendix 3 SPECIFICATIONS
ENTER
,
MENU
,
TEST
,
PAUSE
,
,
,
,
X
Y
Origin
(1) The letters are cut in order starting with "R"
(2) After the last letter ("P") has been cut, the machine returns to the origin
point and the outer border is cut
The origin is rotated 90 degrees ("AXIS" on the display menu is set to "90deg").
Feed length
Sheets with a width exceeding 610 mm (24"): 4,000 mm (157-7/16")
Sheets with a width of 610 mm (24") or less : 8,000 mm (315-15/16")
Cut length
Fills the
hard clip
Front margin: 25 mm (1") or more
Side margins: 25 mm (1") or more
Side margins:
25 mm (1")
or more
Movable
pinch roller (left)
Movable pinch roller (right)
Cutter
protector
(
*
)
However, a sheet (paper) with a width of 50 mm (1-15/16") to 762 mm (30") can be loaded only if it is a flat sheet (paper) or a
rolled sheet (paper) with a sheet base. When using a stand (PNS-121), a rolled sheet (paper) with a width in the range of 50 mm
(1-15/16") to 610 mm (24") can be loaded.
(
**
)
The following conditions must be satisfied:
- Sheet type: 3M Scotchcal Mastercut Film, ARLON Series 2100
- Special stand (a roll sheet must be set at the rear and on the inner sheet hanger)
- Side margins: 25 mm (1") or more for both the left and right margins
- Front margin: 25 mm (1") or more
(After loading the sheet, using the display menu to select “EDGE” as the sheet type automatically sets a front margin of 25 mm (1").)
- Use of the display menu’s “AREA” function to perform feed of the sheet length plus 0.2 m and set the sheet correctly
- Cutting of the following data one time
