Roland AT900 Music Atelier Page 201 Owner'S Manual Download

Page: 201 / 300

199

Creating Original Accompaniment Rhythms

Touch <Rhythm> on the Main screen.

The Rhythm screen appears.

fig.02-09.eps

In the Rhythm screen, touch <

> (Utility).

The Utility screen appears.

fig.02-10.eps

Touch <Customize>.

The Rhythm Customize screen appears.

When opening a new Rhythm Customize screen

When calling up a source.

Preparations for Creating
User Rhythms

Displaying the Rhythm Customize Screen

Rhythm Name

Beat

Division Name (p. 200)

button

Switches the page when the rhythm pattern is
displayed over multiple pages.

(Zoom Out/Zoom In) button

Expands (zooms in) and reduces (zooms out) the
rhythm pattern display.

Current location (Measure: Beat: Tick)

Instrument Name

Indicates the name of the instrument used in the
rhythm.

Rhythm Pattern Display

Displays the notes in the selected rhythm pattern.

(Utility) button

Displays the menu with settings for the Rhythm
Customize function.

(Preview) button

Allows you to listen to the created rhythm.

(Delete) button

Deletes the rhythm in the displayed measure.

(Copy) button

Copies the rhythm in the displayed measure and adds
it to the end of that measure.

button

When more than eight different instruments are used
in a rhythm, press these buttons to switch through the
instrument names.

Scroll Bar

This indicates the position of the current measure in
the overall rhythm.

AT-900_e.book 199 ページ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands

Roland AT900 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands